Garelick 89421 21-Foot Aluminum Snow Roof Rake With 24-Inch Blade

Comment: Good product that had an extensive reach to the gutters on a high roof. The extended time we had snow & ice needed this rake. Pleased with the performance.

Comment: This product actually works well. I used it after the blizzard of 2010 in the DC area. I used it after I already had ice dams on my roof more than a week after the 2 snow storms were over. It was very effective at getting the dampened snow off my roof. Of course it doesn' cut through ice dams. . I didn't notice damage to my shingles with using this product. The rake didn't fall apart either, it held up under the weight of the snow I was pulling. Be prepared to shovel all that snow that you pull down off your roof! I have a rambler so I didn't have to use all of the pole attachments. The rake handle has some flexibility to it when extended with the extra lengths of poles. Assembly was not hard either, the directions were easy to follow. I recommend it especially if you have an older home or one that doesn't have proper air sealing and insulation in the attic.

Comment: Went out today to use this for the first time. The snow is extremely wet and HEAVY. Taking less than an hour to clear 10" of wet snow from a 24'x48'foot building. I was able to reach all I needed to and still had an extension left. Using one section of scaffold I was able to get my line of sight just right and comfortably work. I recommend this item.

Comment: Like others have said, do yourself a favor and replace the hardware before using. After that is taken care of, it works awesome and is a breeze to use, especially with the rollers. I would have given 5 stars except for the shoddy hardware.

Comment: I was a bit reluctant to buy after reading some negative reviews but I did not experience any of the problems cited. It is light and maneuverable and quite strong. The bolts did not break or work lose. The sections do snap together but you have to push the buttons down far enough. A piece of metal such as a screwdriver helps. I wanted more than 21 feet so I made my own 6 foot extension with a piece of PVC pipe which is the perfect size for this. If you want to do this just drill a hole through one wall of the PVC pipe about 6 inches from the end, insert the pole end with the rubber handle removed, line up the pole hole with your drilled hole, and then drill the rest of the way through the other side. Use a bolt to join your extension to the pole.